Product Features

Environmental Friendly

Adaptive to various temperature, altitude and humidity factors. Components are sealed to prevent sand and dust build-up within the equipment.

Voltage Ride Through

The Wind Turbine meets the requirements of low-voltage and high-voltage ride through.

Grid Adaptation

When the grid voltage or frequency fluctuates, it meets the requirements of active power, reactive power, frequency, and inertia response.

High Safety Design

The capacity of each component is determined by structural strengthening design, fatigue load calculation and strength checks under all working conditions. The Gearbox and the Converter are water-cooled to ensure the reliable operations of the components. The system has three types of shutdown protections under various working conditions. This Wind Turbine has a series of personnel safety designs and meets lightning protection requirements.

Reliable Design

This Wind Turbine is designed based on redundancy design, margin design, and environmental adaptability design. These designs are verified using computer simulations.

Pitch Control and Yaw Control

The Blades respond quickly to changes in wind speed to meet the requirements for maximum efficiency. Yaw Control is used to turn the Wind Turbine Rotor as per the wind direction.

Efficient Utilization and Conversion of Wind Energy

The Blades and electrical conversion are designed to meet the requirements.

Technical Specifications
Basic Parameters
Rated power MW 5
Wind Level IEC S
Cut-In Wind Speed m/s 3
Rated Wind Speed m/s 9.5
Cut-Out Wind Speed m/s 22
Service Life year 20
Operating Ambient Temperature -30~40
Living Environment Temperature -40~50
Rotor System
Rotor Diameter m 193
Sweep Area
Generator
Generator Type / Doubly-fed asynchronous Generator
Rated Voltage V 690
Converter
Converter Type Doubly-fed Converter
Rated Power Factor -0.95~0.95
Rated Output Power
Rated Output Voltage
Brake System
Aerodynamic Braking System Implemented through the Pitch System
Mechanical Braking System High-speed Shaft Braking System
Yaw System
Type/Design Motor-Gear Drive/ Four point Contact Ball Bearing
Yaw Brake Hydraulic Brake
Lightning Protection and Tower Type
Lightning Protection Design Standard Comply with IEC61400-24-2019 Standard
Tower Type Steel Conical Structure
Related Wind Turbines
  • SI-16840
    3.X MW - 4.X MW platform wind turbine products are designed for a wide range of wind and site conditions. Rotor diameters is available up to 193 meters, and the height of hub up to 140 meters, the power rating is up to 4.55MW.
  • SI-172625
    5.X MW - 6.X MW platform wind turbine products are designed for mid-to-high wind speed. Rotor diameters is available up to 195 meters, and the height of hub up to 140 meters, the power rating is from 5.0 MW to 6.25 MW.
  • SI-18572
    7.X MW -8.X MW platform wind turbine products are designed applicable to wide wind and environmental conditions. Cooperating with DNV, this platform adopts SANY’s latest component technology. The rotor size of this platform is ranging from 180 to 200+ meters and the power rating is upto 8.X MW.
Inquiry
*Equipment
*Contact Information
*Project Location
Company Name
Purchase Timeframe
More Specifics
Verification Code
I agree that my data from the contact form are raised andprocessed to the answer of my inquiry.